Cisco HWIC-1FE和HWIC-4ESW的区别

请问这两种模块除了端口数量不同,还有什么区别?为什么1FE比4ESW还要贵好多?是不是他们是不同功能的模块?

hwic-1fe是三层快速以太网高速wan口,可以定义为nat的inside、outside等
具体描述:http://www.cisco.com/en/US/prod/collateral/routers/ps5855/prod_brochure0900aecd8019dc1f.pdf
hwic-4esw是三层交换模块。只能定义为nat的inside支持其余特性如:
•VLANs

•Inline Power for Cisco IP Phones

•Layer 2 Ethernet Switching

•802.1x Authentication

•Spanning Tree Protocol

•Cisco Discovery Protocol

•Switched Port Analyzer

•IGMP Snooping

•Storm Control

•Intrachassis Stacking

•Fallback Bridging
具体描述:http://www.cisco.com/en/US/docs/ios/12_3t/12_3t8/feature/guide/esw_cfg.html#wp1043332
温馨提示:内容为网友见解,仅供参考
第1个回答  2015-09-14
  CISCO HWIC-4ESW为4端口单宽10/100BASE-T以太网交换HWIC,适用于Cisco 3800系列路由器。CISCO HWIC-4ESW很专业三层交换机 nm-16-esw 模块no ip cef不进行转发,vlan 配置vlan三层交换机是在特权模式下vlan database进入vlan的添加pc 放c3640路由器crt连接上后,no ip routing不进行路由转发ip defaul-gateway 网管ip 追问不能执行交换机上的命令,比如vlan database等

  hwic-4esw是三层交换模块。只能定义为nat的inside支持其余特性如:
•VLANs
•Inline Power for Cisco IP Phones
•Layer 2 Ethernet Switching
•802.1x Authentication
•Spanning Tree Protocol
•Cisco Discovery Protocol
•Switched Port Analyzer
•IGMP Snooping
•Storm Control
•Intrachassis Stacking
•Fallback Bridging
相似回答